Logitech Rally Bar / MeetUp lights, decoded

What this error means

Logitech's documented LED language for the Rally family: solid red = microphone MUTED (the one that ends 'can they hear me?' debates), solid orange = video muted, blinking orange = no display connected, solid white = in a call, blinking white = incoming call, blinking blue = Bluetooth pairing, solid cyan = powered and idle, blinking pink = firmware updating (leave it alone), and fast-blinking red = a camera/UVC error.

Symptoms

• Colored light on the bar and confusion in the room
• 'They can't hear us' (look for solid red)
• Bar seemingly frozen (check for pink = updating)

Try this first (safe DIY steps)

1. Solid red: you're muted — unmute from the touch controller, room PC, or the bar
2. Blinking orange: the bar sees no display — check the HDMI to the TV
3. Blinking pink: firmware update in progress — do not power cycle; give it several minutes
4. Fast red blink: power cycle the bar; if it persists, reseat the USB to the room PC

Safety: power off before any physical intervention. Never bypass covers or interlocks — fuser areas run hot enough to burn.

When to call a technician

Persistent camera errors after power cycle and cable reseat — IT/AV support with Logi Sync diagnostics.